Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

   "latitude": float number,               -->   latitude in degrees,decimal fractional minutes (note: we do not use this information  anymore, yet it cannot be empty)
   "longitude": float number,   -->   longitude in degrees,decimal fractional minutes (note: we do not use this information  anymore, yet it cannot be empty)
"altitude": float number,   -->   altitude in meters (it can be empty) 
"locationName": string, --> tested location name (can be empty)
"eduroamDbInstid": string, --> SP id used in eduroam DB, provided by the NRO (can be empty)
"eduroamDbLocationid": string, --> Location Id used in eduroam DB, provided by the NRO (can be empty)
  "testDeviceLocationDescription": string -->   describes the location of the test device
  "locationMethod": string,   -->   typical values are 'Through IP' or 'Geolocation' (note: we do not use this information  anymore, yet it cannot be empty)
 "wifiSurround": array of BSSID => sig strength and SSID --> list of SSIDs found
"accessPointVisibleSSIDCount": integer --> number of Wi-Fi cells with a normally visible SSID
"accessPointHiddenSSIDCountaccessPointHiddenCellCount": integer --> number of Wi-Fi cells with a "hidden" SSID
"HS2Presence": array --> list of HS2.0 consortium identifers found
"channelsInUse": array --> list of available channels / frequencies
}
[connectivity]
{
"eduroamAuthnSuccessfuleapAuthnResult": stringarray of EAP types and the auth times (float) -->>   time needed resultfor ofsuccessful eduroam AuthN (true or false) in sec; ; -1=no success
 "ipv4TimeToAddress": float number --> time needed to get valid IPv4 address in sec; -1=no connectivity;
"ipv6TimeToAddress": float number --> time needed to get valid IPv6 address in sec; -1=no connectivity;
"eduroamMinimalPortSetOpen": boolean --> is minimal set of ports for eduroam SSID open? (true/false)
"eduroamWronglyClosedPorts": array of strings (e.g. "TCP/443") --> list of ports which should be open but are closed
"encryptionLevel": array of strings --> list of available encryption standards
"signalQuality": string --> list with signal quality per channel
"transparentWebProxy": boolean --> transparent proxy used (true/false)ž
"NAT": boolean --> NAT used (true/false)  
}
[performance]
{
"downloadThroughput": float number,   --> download speed in KBps (note: we use one decimal digit)
   "uploadThroughput": float number,   --> upload speed in KBps (note: we use one decimal digit)
   "ipv4LocalPing": float number,   --> IPv4 ping time in ms (note: we use one decimal digit) -1 if there was no IPv4 connectivity
   "ipv6LocalPing": float number,   --> IPv6 ping time in ms (note: we use one decimal digit) -1 if there was no IPv6 connectivity

}

JSON message example (

...

PHP creation script)

{
    "reportOrigin": {
       [reportOrigin]
{
   "testDeviceType": "Frankenprobe",
   "testDeviceVersion": "1.0,
  ", "testDeviceId": "00-11-22-33-44-55",
   "testInstanceUniqueId": "13df2a-671bbfa5697-13245-67713af",
   "testStartTimestamp": "2017-09-13 15:00:00",
   "testFinishedTimestamp": "2017-09-13 15:02:19",
}[environment]
{
   }, "environment": { "latitude": 38.25,
   "longitude": 21.73,
"altitude": -213.45,
"locationName": "Subterranean University", Main Building",
"eduroamDbInstid": "13", "eduroamDbLocationid": "2", "testDeviceLocationDescription": "rector's office, hidden behind the 'A Starry Night' van Gogh painting on the rear wall",
   "locationMethod": "Differential Indoor GPS",
"wifiSurround": [": { "02-56-23-12-77-a2": { "eduroam": -67, "drillTest": -67 }, "09-55-ae-b1-99-33": { "geological_symposium" ] ,
: -92 } }, "accessPointVisibleSSIDCount": 7,
HS2Presence": [ "00-1B-C5-04-60" ], "accessPointHiddenSSIDCountchannelsInUse": 1,
}[connectivity]
{
   "eduroamAuthnSuccessful": true,
  [ 1, 6, 11, 54 ] }, "connectivity": { "eapAuthnResult": { "TLS": -1, "TTLS": 1.086, "PEAP": 0.997 }, "ipv4TimeToAddress": 0.672,
  09, "ipv6TimeToAddress": -1,
}[performance]
{
  , "eduroamMinimalPortSetOpen": false, "eduroamWronglyClosedPorts": [ "TCP\/443" ], "encryptionLevel": [ "WPA2\/AES" ], "transparentWebProxy": false, "NAT": true }, "performance": { "downloadThroughput": 4375.0,
, "uploadThroughput": 3912.5,
"ipv4LocalPing": 4.7,
"ipv6LocalPing": -1,
} }